I Pritamsinh ZALA, had a strong vision to develop and innovate new technology to bring about a change in society and lessen the burden on mankind. This ambition of mine made my mind crystal clear that I wanted to be a Mechanical Engineer. Hence, landing into Mechanical engineering bachelor's at the GUJARAT TECHNICAL UNIVERSITY was the first step towards achieving my goal. I have a good academic record of marks throughout with 72 % in 10th grade, 7. 29 CGPA IN DIPLOMA MECHANICAL that provided me an edge to take admission in my undergraduate studies and I successfully passed my undergraduate with 7. 25 CGPA. During the second year of my undergraduate education and in diploma, I got an opportunity to work with the Technical PROJECT, its name is “DESIGN AND MODIFICATION OF BUILDING GLASS WASHER”and “180 DEGREE ROTATING TROLLY”. I have learned many things while working on both these projects but the best part was to make the design of both the machines. Initially, it was difficult but my professors helped me a lot in making such a complicated design of both the machine. They guided me basic about design field, like how The reason for the failure cannot be identified and also no repair work can be done on the machine. It is difficult to find the working load of a machine as the material used in the machine components and the reaction forces acting between the machine components may not be known.
Hence, machine design for any product is important to have the knowledge of some key factors like a lifetime, maximum working load, mode of failure, critical elements, and materials used.
Therefore, machine design is the most important part while creating a product.
The role of my professors is perhaps the biggest in helping me understand all the concepts of the subjects. They were ready to help whenever I needed it.
When I completed three years of my undergraduate program, I had a fair knowledge of the subjects and where they might lead me in the future. But as per my opinion, the scope and area of application of design engineering are probably more than any other subject today, although it is the first step to make any product or a machine. After completing my three programs I joined for an internship as a trainy engineer in TVS MOTORS for 6 months. The six months of industrial training after three years of my undergraduate program also gave me a very good idea about the various aspects of mechanical Engineering and Management.
Now, at this point in my career, I am certain that a postgraduate program would help me in the further application of the knowledge and skill that I have attained during the course of my graduation. Besides Canada is a rapidly growing country with a quality education system. Learning in supportive academic environments where professors are approachable and classrooms reflect the cultural diversity in Canada. The learning aspect is based on practical education as well as a theory but, Canada emphasizes more on practical study approach.
English Language Proficiency:
I scored 6. 5 Bands Overall in IELTS. . (L: 6. 5 | S: 6. 0 | R: 6. 5| W: 6. 0).
Finance:
I have paid 10, 015. 00 CAD as my tuition fees for one year to the University of Windsor and 10, 015. 00 CAD as my GIC in Scotia Bank to cover my living expenses.
Future Goals:
Nowadays production sectors are expanding and hence there is a huge demand for design professionals in India. After getting a post-graduate degree from Conestoga college, I plan to return to India to live with my parents. These days India is proving to be a pioneer in developing and executing technologies of the future, this is especially true for the field of manufacturing and management, where developers strive to find a solution to daily problems and aim to make human life smooth and easy. I feel that a post-graduate degree from an esteemed college like Conestoga will surely lend me to product-based companies like TATA GROUP, THERMAX, LARSEN & TOUBRO, etc as a highly-skilled design engineer when I return to India.
I
Pritamsinh
ZALA
, had a strong vision to develop and innovate new technology to bring about a
change
in society and lessen the burden on mankind. This ambition of mine made my mind crystal
clear
that I wanted to be a
Mechanical
Engineer.
Hence
, landing into
Mechanical
engineering bachelor's at the GUJARAT TECHNICAL UNIVERSITY was the
first
step towards achieving my goal. I have a
good
academic record of marks throughout with 72 % in 10th grade, 7. 29 CGPA IN DIPLOMA
MECHANICAL
that provided me an edge to take admission in my
undergraduate
studies and I
successfully
passed my
undergraduate
with 7. 25 CGPA. During the second
year
of my
undergraduate
education and in diploma, I
got
an opportunity to work with the Technical PROJECT, its name is
“DESIGN
AND MODIFICATION OF BUILDING GLASS WASHER
”and
“180 DEGREE ROTATING
TROLLY
”. I have learned
many
things while working on both these projects
but
the best part was to
make
the
design
of both the
machines
.
Initially
, it was difficult
but
my professors
helped
me a lot in making such a complicated
design
of both the
machine
. They guided me basic about
design
field, like how The reason for the failure cannot
be identified
and
also
no repair work can
be done
on the
machine
. It is difficult to find the working load of a
machine
as the material
used
in the
machine
components and the reaction forces acting between the
machine
components may not
be known
.
Hence
,
machine
design
for any product is
important
to have the knowledge of
some
key factors like a lifetime, maximum working load, mode of failure, critical elements, and materials
used
.
Therefore
,
machine
design
is the most
important
part while creating a product.
The role of my professors is perhaps the biggest in helping me understand all the concepts of the subjects. They were ready to
help
whenever I needed it.
When I completed three years of my
undergraduate
program
, I had a
fair
knowledge of the subjects and where they might lead me in the future.
But
as per my opinion, the scope and area of application of
design
engineering are
probably
more than any other subject
today
, although it is the
first
step to
make
any product or a
machine
. After completing my three
programs
I
joined
for an internship as a
trainy
engineer in TVS MOTORS for 6 months. The six months of industrial training after three years of my
undergraduate
program
also
gave me a
very
good
idea
about the various aspects of
mechanical
Engineering and Management.
Now
, at this point in my career, I am certain that a postgraduate
program
would
help
me in the
further
application of the knowledge and
skill
that I have attained during the course of my graduation.
Besides
Canada is a
rapidly
growing country with a quality education system. Learning in supportive academic environments where professors are approachable and classrooms reflect the cultural diversity in Canada. The learning aspect
is based
on practical education
as well
as a theory
but
, Canada emphasizes more on practical study approach.
English Language Proficiency:
I scored 6. 5 Bands
Overall
in IELTS.
.
(L: 6. 5 | S: 6. 0 | R: 6. 5| W: 6. 0).
Finance:
I have paid 10, 015. 00 CAD as my tuition fees for one
year
to the University of Windsor and 10, 015. 00 CAD as my
GIC
in Scotia Bank to cover my living expenses.
Future Goals:
Nowadays production sectors are expanding and
hence
there is a huge demand for
design
professionals in India. After getting a post-graduate degree from Conestoga college, I plan to return to India to
live
with my parents. These days India is proving to be a pioneer in developing and executing technologies of the future, this is
especially
true for the field of manufacturing and management, where developers strive to find a solution to daily problems and aim to
make
human life smooth and easy. I feel that a post-graduate degree from an esteemed college like Conestoga will
surely
lend me to product-based
companies
like TATA GROUP,
THERMAX
, LARSEN &
TOUBRO
, etc as a
highly
-skilled
design
engineer when I return to India.
Funny
Love
Wow
Angry
Sad