diagram below shows the process of manafacturing cement

The diagram illustrates the main functions of the tool for making cement and the production of the concrate for construction aims. There are several stages in making both cement and concrete. This assignment explores how to fabricate these two products. The process of cement production begins with mixing the limestone and clay at the same time sending them to the crusher. Consequently, the mixture is changed into the powder. Then it passes through the mixer, after that the rotating heater where the container is heated up. The mass goes into the final stage to the grinder before packaging. The most substantial product of construction industy is ready to transfer to their point of destinations. On the other hand in order to fabricate concrete there are only two main stages. Four crucial products are needed in the appropriate quantity. High quality cement about fifteen percent, sand (25%) the highest proportion takes small stones (gravel) with fifty percent and water (10%). All these ingredients are added to the concrate mixer. Finally, the container rotates in the same direction and the concrate is ready for using.